Folding and cleaning
1. Turn on the power supply of the control box and point the control valve to the position of the auxiliary valve
2. Start the secondary machine
3. Point the clutch control button of the auxiliary machine to the closed position, and the fan starts to work
4. Point the control button of the vacuum box to the down position
5. Point the control button of left or right scan disk to the down position
6. Point the control button of left-sweep rotation or right-sweep rotation to the positive rotation position (clockwise for the left disk and counterclockwise for the right disk)
7, the left water spraying, right water spraying, after water spraying control button to open position
8. Point the pump control button to the open position
9, the vehicle at the appropriate speed, start cleaning action
End of folding sweep
1. The vehicle stops running
2, the water pump control button, left water spraying control button, right water spraying control button, after water spraying control button point to the closed position
3. Point the broom control button to the middle position
4. Point the sweep control button to the rising position, and then point to the middle position
5. Point the control button of the vacuum box up, and then point to the middle position
6, the auxiliary engine clutch control button points to the point, and then point to the middle position
7. Point the control key of the control valve to the middle position
8. Shut off the auxiliary engine
9. Turn off the power supply of the control box
Fold out the garbage
1. Open the power supply of the control box and point the control button of the control valve to the position of the main valve
2. Start the main engine of the vehicle
3. Press the vehicle clutch
4. Open the attached oil pump clutch switch of the vehicle (pull outward)
5, release the vehicle clutch at an appropriate speed
6. Point the back door control button on the control box to the open position, and then point to the middle position after 5 seconds
7, the car control button points to the position of the rise, according to the Angle of the car tilt can be at any time to the control key to the middle position, at this time the car tilt rise stop
8. Garbage removal
9. After garbage cleaning is completed, point the control button of the carriage to the lower position, and point the control button to the middle position after the carriage is fully returned
10, the back door control key to the close position, 10 seconds later to the middle position
11. End of garbage cleaning
12. Press the vehicle clutch
13. Close the attached control button of oil pump clutch (push inward)
14. Release the vehicle clutch at the appropriate speed
15. Point the control valve of the control box to the middle position
16. Turn off the power supply of the control box
Post time: Jul-20-2022