Teach you how to easily maintain the sweeper

With the progress of the times, with the development of the economy, the development of industry, the rise of small and medium-sized enterprises, the increase of labor costs, the improvement of people’s living standards and the higher and higher standards of environmental requirements, choose scrubbers, sweepers, and dust The cleaning of carts and other cleaning equipment has gradually replaced manual cleaning.

However, people’s knowledge of the maintenance of cleaning equipment is relatively shallow, so let’s briefly introduce the daily maintenance work of the sweeper:

1. First of all, we should check the integrity and degree of wear of each roller brush seal of the sweeper, and replace the more severely worn seals and roller brushes. At the same time, check the tension of the connection part when replacing it, and adopt the corresponding The tool tensions it.

2. Open the outer cover of the sweeper. For parts with serious oil pollution, we must also borrow a special cleaning agent to clean them.

3. Focus on the maintenance and cleaning of the dust box and filter of the sweeper, and focus on cleaning the more heavily contaminated parts. And the damage degree of the filter should be replaced and adjusted.

4. Use special lubricating oil to lubricate the bearings and brake system of the sweeper. At the same time, the oil-fueled sweeper needs to replace the internal engine oil to ensure that the bearing points are lubricated without rust.

5. Check the wear and tear of each circuit of the sweeper, and replace and repair it according to the severity of the wear to ensure that there is no short circuit in the circuit.

6. For electric sweepers, we should focus on the overhaul and maintenance of their controllers and motors. For sweepers that run abnormally and are excessively noisy, we should find professional technicians for repair and maintenance.

7. The sweeper battery is the main power source of the sweeper. We must do its maintenance work. First of all, check whether it loses electricity and discharges normally after one year of use. For the sweeper battery that has a serious loss of electricity and discharge We should fix it in time. And according to the acid position of the battery to add correspondingly.

8. Check the operation status of the safety contact switch of the seat of the sweeper, check the battery acid position, check the tightness, wear and operation of the drive belt. Check the wear of each side brush, adjust and replace appropriately.