In the daily process of using the scrubber, you may often encounter large and small problems, or you may miss our daily work because of some inconspicuous small problems. Let’s share the daily routine of the scrubber. The solution to the problem.
1. The scrubber absorbent strip does not absorb water cleanly?
Answer: Check whether the cover of the recovery tank is closed, and whether the sealing of the recovery tank of the washing machine is intact. Whether the suction hose is blocked.
2. Is it not clean when it absorbs water?
Answer: Check whether the absorbent wiper strip is stained with foreign matter, such as hair strands, paper balls, toothpicks, etc. If you find that it is cleaned in time, the problem can be solved. Pay attention to the length of the absorbent tape. This is a consumable. Generally, the service life is about 3 months. If the absorbent tape is damaged or severely worn, please contact the manufacturer to purchase it in time.
3. Insufficient supply of cleaning agent?
Answer: Check whether the proportion of cleaning agent and the adjustment of water volume are appropriate.
4. Is the drain solenoid valve blocked?
Answer: Disassemble the water discharge solenoid valve of the automatic washing machine and clean it.
5. Does the automatic scrubbing machine not work?
Answer: The brush plate assembly is lifted off the ground, the brush plate motor over-cutting protector is working, and the brush plate motor carbon brush is severely worn (you need to contact the manufacturer to solve it)
After checking these, you can determine the simple faults of some automatic washing machines and solve them.
Post time: Oct-27-2021